1. Инсталирайте масления филтър в смукателния порт на хидравличната помпа, за да защитите всички компоненти в системата . Въпреки това, ограничен от съпротивлението на засмукване на маслото на помпа Компоненти на системата, така че са необходими други филтри на маслената линия .
3., инсталиран в помпата на масления изход на инсталацията, може да бъде ефективен за защита на различните от хидравличните компоненти на помпа то .
3. Install on the return oil circuit, and install the filter on the return oil circuit of the system. In this way, the particles generated by the peeling off of the oil tank or tube wall oxide layer or the wear of the hydraulic components in the system can be filtered out to ensure that the hydraulic oil in the tank is clean and the pump and other components are Защитен . Тъй
4. Installed in the branch, this way is mainly installed in the overflow valve return oil line, at this time will not increase the pressure loss of the main oil line, the flow of the filter can also be less than the flow of the pump, more economic and reasonable. However, it cannot filter all the oil, nor can it guarantee that the impurities will not enter the system.
5. Separate filtration, with a hydraulic pump and oil filter to form an independent and separate filter circuit outside the system, so as to continuously remove impurities in the system, to ensure the system clean. Generally used in large hydraulic systems.
